WVC Series Optional Configurations

• ZF gearbox

• Spindle through coolant

• CNC system is optional

• Item		Unit	WVC500	WVC630	WVC800	WVC1000	WVC1370	WVC1814	WVC2014	WVC3090
  Worktable	Worktable Size (L×W)	mm	500×500	630×700	800×800	1000×1000	1360×700	900×2000	1000×2000	3000×900
  	Max. Worktable Load	kg	600	950	1500	2500	1000	3000	5000	8000
  	Worktable Indexing Angle	°	360×1°	360×1°	360×1°	360×1°	/	/	/	/
  	Max. Worktable Swing Diameter	mm	Φ700	Φ1200	Φ1600	Φ1600	/	/	/	/
  	T-slot (No. of slots-slot width×pitch)	mm	5-18×80	5-22×125	5-22×160	5-22×200	5-18×122	5-22×165	7-22×170	5-22×120
  Travel Range	Worktable Lateral Travel (X-axis)	mm	660	1050	1100	1300	1200	1800	2000	700
  	Headstock Vertical Travel (Y-axis)	mm	580	750	850	1000	765	1400	1400	700
  	Worktable/Column Longitudinal Travel (Z-axis)	mm	620	900	900	1000	700	900	1200	500
  	Distance from Spindle Face to Worktable Center	mm	130–700	130–1030	180–1080	200–1200	180–880	200–1100	300–1500	50–500
  	Distance from Spindle Center to Worktable Surface	mm	100–680	120–870	100–950	120–1120	140–905	140–1540	350–1750	0–700
  Spindle	Spindle Type	/	Belt-driven Spindle	Belt-driven Spindle	Belt-driven Spindle	Belt-driven Spindle	Belt-driven Spindle	Belt-driven Spindle	Belt-driven Spindle	Belt-driven Spindle
  	Max. Spindle Speed	r/min	8000	6000	6000	6000	6000	6000	6000	6000
  	Spindle Taper	/	BT40	BT50	BT50	BT50	BT50	BT50	BT50	BT50
  Feed Rate	Rapid Traverse Speed (X/Y/Z)	m/min	40/40/40	24/24/24	24/24/24	24/24/24	20/12/20	18/12/18	18/12/18	24/20/24
  	Cutting Feed Rate	m/min	1–10	1–10	1–10	1–10	1–10	1–10	1–10	1–10
  Motor	Spindle Motor Power	kW	11/15	15/18.5	15/18.5	15/18.5	11/15	15/18.5	15/18.5	15/18.5
  	Servo Motor Torque (X/Y/Brake/Z)	N.m	12/27B/20	20/27B/20	20/27B/20	20/27B/20	28/18B/28	28/18B/28	35/28B/28	28/18B/28
  	Coolant Pump Motor Power	kW	0.55	0.55	0.55	0.55	0.55	0.55	0.55	0.55
  Accuracy	Positioning Accuracy	mm	0.008/300	0.008/300	0.008/300	0.008/300	0.008/300	0.008/300	0.008/300	0.008/300
  	Repeat Positioning Accuracy	mm	0.006	0.006	0.006	0.006	0.006	0.006	0.006	0.006
  System	CNC System	/	FANUC	FANUC	FANUC	FANUC	SYNTEC	SYNTEC	SYNTEC	SYNTEC
  Power Supply	Power Supply	KVA	≥20	≥25	≥30	≥40	≥20	≥25	≥30	≥30
  Air Pressure	Air Demand	kg/cm2	≥6	≥6	≥6	≥6	≥6	≥6	≥6	≥6
  	Air Flow Rate	m3/min	≥0.5	≥0.5	≥0.5	≥0.5	≥0.5	≥0.5	≥0.5	≥0.5
  Machine Dimensions	Floor Space (L×W×H)	mm	3200×2200×2700	4200×3200×3100	5300×4100×3400	6300×4900×3700	3900×3280×2600	4700×3300×3500	5300×4100×3500	6200×4000×3200
  	Machine Weight (Approx.)	kg	8000	11000	14000	18000	9500	15000	18500	11500
  Note	Technical parameters are subject to change without prior notice.